Structure illumination microscopy imaging of lipid vesicles in live bacteria with naphthalimide-appended organometallic complexes.

There is a lack of molecular probes for imaging bacteria, in comparison to the array of such tools available for the imaging of mammalian cells. Here, organometallic molecular probes have been developed and assessed for bacterial imaging, designed to have the potential to support multiple imaging modalities. The chemical structure of the probes is designed around a metal-naphthalimide structure. The 4-amino-1,8-naphthalimide moiety, covalently appended through a pyridine ancillary ligand, acts as a luminescent probe for super-resolution microscopy. On the other hand, the metal centre, rhenium(i) or platinum(ii) in the current study, enables techniques such as nanoSIMS. While the rhenium(i) complex was not sufficiently stable to be used as a probe, the platinum(ii) analogue showed good chemical and biological stability. Structured illumination microscopy (SIM) imaging on live Bacillus cereus confirmed the suitability of the probe for super-resolution microscopy. NanoSIMS analysis was used to monitor the uptake of the platinum(ii) complex within the bacteria and demonstrate the potential of this chemical architecture to enable multimodal imaging. The successful combination of these two moieties introduces a platform that could lead to a versatile range of multi-functional probes for bacteria.

Lanthanoid pyridyl-ß-diketonate 'triangles'. New examples of single molecule toroics.

Trinuclear lanthanoid clusters have been synthesised and investigated as toroidal spin systems. A pyridyl functionalised ß-diketonate, 1,3-bis(pyridin-2-yl)propane-1,3-dione (o-dppdH) has been used to synthesise a family of clusters of the form [Dy3(OH)2(o-dppd)3Cl2(H2O)4]Cl2·7H2O (1), [Tb3(o-dppd)3(µ3-OH)2(CH3CH2OH)3Cl3][Tb3(o-dppd)3(µ3-OH)2(H2O)(CH3CH2OH)2Cl3]Cl2·H2O (2), [Ho3(OH)2(o-dppd)3Cl(H2O)5]Cl3·3H2O (3) and [Er3(OH)2(o-dppd)3Cl2(H2O)3(CH3OH)]Cl2·3H2O·CH3OH (4). Despite the previous occurrence of this structural motif in the literature, these systems have not been widely investigated in terms of torodic behaviour. Magnetic studies were used to further characterise the complexes. DC susceptibility studies support weak antiferromagnetic exchange in the complexes. Slow magnetic relaxation behaviour is observed in the dynamic AC magnetic studies for complex 1. Theoretical studies predict that complex 1 and 3 have a non-magnetic ground state based on a toroidal arrangement of spins. Changes to the coordination environment in 2 do not support a toroic spin state. The prolate nature of the ErIII centres in complex 4 and large transverse anisotropy do not support the toroidal arrangement of lanthanoid spins in the complex.

Rh(I)(2,5-norbornadiene)(biphenyl)(tris(4-fluorophenyl)phosphine): Synthesis, Characterization, and Application as an Initiator in the Stereoregular (Co)Polymerization of Phenylacetylenes.

The synthesis of the Rh(I)-aryl complex, Rh(I)(nbd)(BiPh)(P(4-FC6H4)3) is reported and its efficacy as an initiator for the (co)polymerization of phenylacetylenes established. The X-ray crystal structure indicates that the complex adopts a slightly distorted square planar geometry whose purity and structure was also confirmed by elemental analysis and 1H, 13C, 31P, 19F, 103Rh, and 31P-103Rh{1H} HMQC NMR spectroscopy. We demonstrate that Rh(I)(nbd)(BiPh)(P(4-FC6H4)3) mediates the (co)polymerization of phenylacetylenes in a controlled fashion with initiation efficiencies as high as 0.98, as evidenced by the pseudo-first-order kinetic and number-average molecular weight versus conversion profiles. The ability to form well-defined AB diblock copolymers, in a stereoregular manner, by sequential monomer addition is verified in the block copolymerization of phenylacetylene with 4-fluorophenylacetylene with quantitative crossover efficiency, as determined by size exclusion chromatography.

A (2-(naphthalen-2-yl)phenyl)rhodium(i) complex formed by a proposed intramolecular 1,4-ortho-to-ortho' Rh metal-atom migration and its efficacy as an initiator in the controlled stereospecific polymerisation of phenylacetylene.

The synthesis of a novel Rh(i)-aryl complex is detailed and its ability to serve as an initiator in the stereospecific polymerisation of phenylacetylene evaluated. Targeting the Rh(i) species, (2-phenylnaphthalen-1-yl)rhodium(i)(2,5-norbornadiene)tris(para-fluorophenylphosphine), Rh(nbd)(P(4-FC6H4)3)(2-PhNapth), following recrystallization we obtained the isomeric (2-(naphthalen-2-yl)phenyl)rhodium(i) complex, Rh(nbd)(P(4-FC6H4)3)(2-NapthPh), as determined by X-ray single-crystal structure analysis, and confirmed by X-ray powder diffraction. The isolation of the latter species was proposed to occur from the target (2-PhNapth) derivative via an intramolecular 1,4-Rh atom migration. This supposition was supported by density functional theory (DFT) calculations that indicated the isolated (2-NapthPh) derivative has lower energy (-19 kJ mol-1) than the targeted complex. The structure of the isolated (2-NapthPh) species was confirmed by multinuclear NMR spectroscopy including 2D 31P-103Rh{1H, 103Rh}, heteronuclear multiple-quantum correlation (HMQC) experiments; however, NMR analysis indicated the presence of a second, minor species in solution in an approximate 1 : 4 ratio with the 2-NapthPh complex. The minor species was identified as a second structural isomer, the 3-phenylnaphthyl derivative, proposed to be formed under a dynamic equilibrium with the 2-NapthPh derivative via a second 1,4-Rh atom migration. DFT calculations indicate that this 1,4-migration proceeds through a low-energy pathway involved in the oxidative addition of a C-H bond to Rh followed by a reductive elimination with the distribution of the products being thermodynamically controlled. The recrystallized Rh(nbd)(P(4-FC6H4)3)(2-NapthPh) complex was subsequently evaluated as an initiator in the polymerisation of phenylacetylene (PA); gratifyingly, the Rh(i) species was an active initiating species with the pseudo-first-order kinetic and molecular weight evolution vs time plots both linear implying a controlled polymerisation while yielding (co)polymers with low dispersities (D = Mw/Mn typically ≤1.25) and high cis-transoidal stereoregularity (>95%). Typical initiation efficiencies, while not quantitative (as judged by size exclusion chromatography), were nonetheless high at ca. 0.8. The presence of the minor 3-phenylnaphthyl species when in solution is proposed to be the cause of the observed non-quantitative initiation.

Complementary Approaches to Imaging Subcellular Lipid Architectures in Live Bacteria Using Phosphorescent Iridium Complexes and Raman Spectroscopy.

A family of three neutral iridium(III) tetrazolato complexes are investigated as bacterial imaging agents. The complexes offer a facile tuning of the emission colour from green (520 nm) to red (600 nm) in aqueous media, while keeping the excitation wavelength unchanged. The three complexes do not inhibit the bacterial growth of Bacillus Cereus, used as a model in this study, and exhibit extremely fast cellular uptake. After a minute incubation time, the nontoxic complexes show subcellular localisation in spherical structures identified as lipid vacuoles. Confocal Raman imaging has been exploited for the first time on live bacteria, to provide direct and label-free mapping of the lipid-enriched organelles within B. cereus, complementing the use of luminescent probes. Examination of the Raman spectra not only confirmed the presence of lipophilic inclusions in B. cereus but offered additional information about their chemical composition, suggesting that the lipid vacuoles may contain polyhydroxybutyrate (PHB).

Photophysical investigation of near infrared emitting lanthanoid complexes incorporating tris(2-naphthoyl)methane as a new antenna ligand.

A conjugated ß-triketone, tris(2-naphthoyl)methane (tnmH), has been synthesized and successfully utilized as an antenna moiety for sensitization of the trivalent lanthanoids Eu3+, Sm3+, Yb3+ and Nd3+, in an isomorphous series of mononuclear complexes formulated as [Ln(tnm)3(DMSO)2] (Ln3+ = Nd3+, Sm3+, Eu3+, Gd3+ and Yb3+). The photophysical properties of the materials were characterized as comprehensively as possible, with overall quantum yields, intrinsic quantum yields based on calculated radiative decays, and sensitization efficiencies reported. This investigation improves understanding of the sensitization processes occurring in the near-infrared (NIR) region, where quantitative data are currently scarce. In fact, the [Yb(tnm)3(DMSO)2] and its deuterated analogue, [Yb(tnm)3(d6-DMSO)2], present high values of overall quantum yield of 4% and 6%, respectively, which makes them useful and readily accessible references for future investigation of NIR-emitting systems.

Lanthanoid complexes supported by retro-Claisen condensation products of ß-triketonates.

ß-Triketonates have been recently used as chelating ligands for lanthanoid ions, presenting unique structures varying from polynuclear assemblies to polymers. In an effort to overcome low solubility of the complexes of tribenzoylmethane, four ß-triketones with higher lipophilicity were synthesised. Complexation reactions were performed for each of these molecules using different alkaline bases in alcoholic media. X-ray diffraction studies suggested that the ligands were undergoing decomposition under the reaction conditions. This is proposed to be caused by in situ retro-Claisen condensation reactions, consistent with two examples that have been reported previously. The lability of the lanthanoid cations in the presence of a varying set of potential ligands gave rise to structures where one, two, or three of the molecules involved in the retro-Claisen condensation reaction were linked to the lanthanoid centres. These results, along with measurements of ligand decomposition in the presence of base alone, suggest the solvent used will modulate the impact of the retro-Claisen condensation in these complexes.

Energy transfer between Eu3+ and Nd3+ in near-infrared emitting ß-triketonate coordination polymers.

Isomorphous ß-triketonate-based lanthanoid polymers containing tris(4-methylbenzoyl)methanide (mtbm) and Rb+ with formula {[Ln(Rb)(mtbm)4]2}n (Ln = Eu3+ and Nd3+) have been synthesised and structurally characterised. The photophysical properties for the Nd3+ complex presented relatively long lifetimes and high quantum yields in comparison with analogous ß-diketonate complexes. Mixed lanthanoid complexes were also formed and their luminescence properties studied, with effective sensitisation of the 4F3/2 of Nd3+via the 5D0 of Eu3+, which is to the best of our knowledge the first example of Eu3+ to Nd3+ sensitisation in a structurally defined coordination complex or polymer.

Probing the effect of ß-triketonates in visible and NIR emitting lanthanoid complexes.

An isomorphous series of lanthanoid complexes containing tribenzoylmethanide (tbm) and 1,10-phenanthroline (phen) ligands has been synthesised and structurally characterised. These complexes, formulated as [Ln(phen)(tbm)3] (Ln = Eu3+, Er3+ and Yb3+), were compared with analogous dibenzoylmethanide (dbm) [Ln(phen)(dbm)3] complexes to investigate the effect of changing ß-diketonate to ß-triketonate ligands on the photophysical properties of the complex. The photophysical properties for the Eu3+ complexes were similar for both systems, whereas a modest enhancement was observed for Yb3+ and Er3+ moving from the dbm to the tbm complexes. A detailed study of the NIR photophysical properties was achieved by adapting the integrating sphere method for the calculation of overall quantum yields in the solid state.

Luminescent Lanthanoid Calixarene Complexes and Materials.

This review aims to provide an overview of recent examples of lanthanoid-calixarene complexes incorporated into light-emitting materials. Background information on the antenna effect and early work on lanthanoid complexes on calixarenes is provided to set the context. Classes of materials discussed include polymers, nanoparticles, and metal clusters.

Visible and Near-Infrared Emission from Lanthanoid ß-Triketonate Assemblies Incorporating Cesium Cations.

The reaction of the ß-triketonate ligands tris(4-methylbenzoyl)methanide and tribenzoylmethanide with the trivalent lanthanoids Eu3+, Er3+, and Yb3+ in the presence of Cs+ afforded polymeric structures where the repeating units are represented by bimetallic tetranuclear assemblies of formulation {[Ln(Cs)(ß-triketonate)4]2}n. The only exception is the structure formed by the reaction of tris(4-methylbenzoyl)methanide, Yb3+, and Cs+, which yielded a polymeric assembly where the repeating units are mononuclear Yb3+ complexes bridged by Cs+ cations. Photophysical measurements on the obtained materials confirmed efficient sensitization from the ligand excited states to the 4f* excited states of the three lanthanoids. According to transient absorption data, Er3+ and Yb3+ are sensitized via energy transfer from the triplet state of the ß-triketonate ligands. On the other hand, energy transfer to Eu3+ seems to occur via an alternative pathway, possibly directly via the singlet state or through ligand to metal charge transfer states. The emission measurements confirm efficient sensitization for all three lanthanoids and bright near-infrared emission for Er3+ and Yb3+, a characteristic that seems to be linked to the specific chemical structure of the ß-triketonate ligands.

Thermal annealing behaviour and gel to crystal transition of a low molecular weight hydrogelator.

The thermal annealing behaviour of an electrolyte-triggered calixarene hydrogelator is found to depend strongly on the specific metal chloride used. While the lithium chloride gel showed typical gel-sol transitions as a function of temperature, the magnesium chloride gel was found to repeatedly strengthen with heat-cool cycles. Structural investigations using small-angle neutron scattering, and scanning probe microscopy, suggest that the annealing behaviour is associated with a change in morphology of the fibrous structures supporting the gel. On prolonged standing at room temperature, the magnesium chloride gel underwent a gel-crystal transition, with the collapsing gel accompanied by the deposition of crystals of a magnesium complex of the proline-functionalised calix[4]arene gelator.

Fully Ir(iii) tetrazolate soft salts: the road to white-emitting ion pairs.

The first examples of anionic Ir(iii) bis-tetrazolate complexes and their combination with a cationic Ir(iii)tetrazole derivative forming "fully tetrazolate" Ir(iii) based soft salts as O2-sensitive white emitters are described herein.

Silver(I), gold(I) and palladium(II) complexes of a NHC-pincer ligand with an aminotriazine core: a comparison with pyridyl analogues.

Dinuclear silver, di- and tetra-nuclear gold, and mononuclear palladium complexes with chelating C,N,C diethylaminotriazinyl-bridged bis(NHC) pincer ligands were prepared and characterised. The silver and gold complexes exist in a twisted, helical conformation in both the solution- and the solid state. In contrast, an analogous dinuclear gold complex with pyridyl-bridged NHCs exists in a linear conformation. Computational studies have been performed to rationalise the formation of twisted/helical vs. linear forms.

Targeting divalent metal cations with Re(I) tetrazolato complexes.

In order to exploit their potential as versatile luminescent sensors, four new Re(I)-tetrazolato complexes with the general formula fac-[Re(CO)3(diim)(L)], where diim is 2,2'-bipyridine (bipy) or 1,10-phenanthroline (phen) and L(-) is either the anion 5-(2'-pyridyl)tetrazolato (2-PTZ(-)) or 5-(2'-quinolyl)tetrazolato (2-QTZ(-)), were prepared and fully characterized. In all cases, the regioselective coordination of the Re(I) center through the N2 atom of the tetrazolato ring was observed. This particular feature ensures the availability of the diiminic (N^N) site that was systematically incorporated into the structure of the 2-PTZ(-) and 2-QTZ(-) ligands for further coordination with metal cations. Such a diimine-type coordination mode was preliminarily tested by using the mononuclear Re(I) complexes as N^N ligands for the preparation of two [(N^N)Cu(POP)] cationic species, where POP is the chelating diphosphine bis[2-(diphenylphosphino)phenyl]ether. The X-ray structures of the resulting Re(I)-Cu(I) dyads revealed that the Re(I) mononuclear complexes effectively behaved as chelating N^N ligands with respect to the [Cu(POP)](+) fragment, the coordination of which also resulted in significant modification of the Re(I)-centered luminescence. With these data in hand, the luminescent sensing abilities of the four new Re(I) tetrazolato complexes were screened with respect to divalent metal ions of toxicological and biological importance such as Zn(II), Cd(II) and Cu(II). The interaction of the Re(I) complexes with Zn(II) and Cd(II) was witnessed by the evident blue shift (Δλmax = 22-36 nm) of the emission maxima, which was also accompanied by a significant elongation of the emission lifetimes. On the contrary, the addition of the cupric ion caused substantial quenching of the radiative processes originating from the Re(I) luminophores.

Lanthanoid/Alkali Metal ß-Triketonate Assemblies: A Robust Platform for Efficient NIR Emitters.

The reaction of hydrated lanthanoid chlorides with tribenzoylmethane and an alkali metal hydroxide consistently resulted in the crystallization of neutral tetranuclear assemblies with the general formula [Ln(Ae⋅HOEt)(L)4 ]2 (Ln=Eu(3+) , Er(3+) , Yb(3+) ; Ae=Na(+) , K(+) , Rb(+) ). Analysis of the crystal structures of these species revealed a coordination geometry that varied from a slightly distorted square antiprism to a slightly distorted triangular dodecahedron, with the specific geometrical shape being dependent on the degree of lattice solvation and identity of the alkali metal. The near-infrared (NIR)-emitting assemblies of Yb(3+) and Er(3+) showed remarkably efficient emission, characterized by significantly longer excited-state lifetimes (τobs ≈37-47 µs for Yb(3+) and τobs ≈4-6 µs for Er(3+) ) when compared with the broader family of lanthanoid ß-diketonate species, even in the case of perfluorination of the ligands. The Eu(3+) assemblies show bright red emission and a luminescence performance (τobs ≈0.5 ms, ${{\Phi}{{{\rm L}\hfill \atop {\rm Ln}\hfill}}}$≈35-37 %, ηsens ≈68-70 %) more akin to the ß-diketonate species. The results highlight that the ß-triketonate ligand offers a tunable and facile system for the preparation of efficient NIR emitters without the need for more complicated perfluorination or deuteration synthetic strategies.

The many roles of mellitic acid during barium sulfate crystallization.

The various roles of mellitic acid during barium sulfate crystallization from nucleation to mesocrystal formation are explored and elucidated.

Structural variations in metal complexes of a tertiary α-hydroxyoxime.

Despite the long term interest in hydroxyoximes as metal ion extractants, there is a lack of information on the possible coordination modes these ligands can assume, particularly in concert with a co-ligand. This is pertinent to the use of these extractants in synergistic systems, where a combination of extractants can achieve commercially useful results. We report here the structures of some metal complexes (M = Mn, Co, Ni, Cu, and Zn) with (1-hydroxycyclohexyl)-phenyl ketone oxime. The results demonstrate that this ligand can support complexes ranging from mononuclear to trinuclear, in association with anionic and neutral co-ligands in some cases. While these results have been obtained in the solid state, they illustrate a range of possible species that may be formed in extractant solutions.

Manganese-calcium clusters supported by calixarenes.

The structure of the oxygen-evolving complex of photosystem II, which contains a cubane-like metal-oxo cluster incorporating four manganese(III,IV) cations, along with a calcium cation, has focussed attention on synthetic analogues of this cluster. Despite this activity, there are relatively few structurally characterised coordination clusters with this combination of metal cations. The calixarenes are synthetically versatile and well established cluster-supporting ligands, which to date have not been reported to support a calcium/manganese cluster. Here we report that p-t-butylthiacalix[4]arene supports CaMn2 and Ca2Mn2 clusters, whereas reactions of p-t-butylcalix[4]arene, p-t-butylsulfinylcalix[4]arene, and p-t-butylsulfonylcalix[4]arene, under the same conditions, produced only homometallic manganese complexes.

Investigating hydrogel formation using in situ variable-temperature scanning probe microscopy.

The assembly and disassembly of supramolecular gel fibres are observed in situ using variable temperature scanning probe microscopy. The results show that fibre formation can be monitored at high resolution at a surface, and the final fibre morphologies are broadly consistent with those found by ex situ analysis of the bulk gel. The impact of a gelation inhibitor upon the fibre morphology is successfully investigated, providing direct evidence for the mechanism of inhibition as a function of additive concentration.